Roland 24 bit Digital Studio Workstation VS-890 - Manual (Page 64)

Making a Multi-Track Recording
Changing the Type of Equalizer
4 3 2 If the
Record Mode
(recording mode)(p. 22) has
been set to "VSR," it is not
possible to use the
equalizer (it will not be
displayed).
Hold down [SHIFT] and press [EDIT (FADER)] for the
channel or track whose equalizer setting you wish to adjust.
Press PARAMETER [ ◄◄ ][ ►► ] several times until
"MST EQ Sel=" appears in the display.
Rotate the TIME/VALUE dial to select equalizer.
CONDITION MARKER*
MST EQ Sel= 3B.andEQ
MEASURE BEAT ▼
EQ Sel (Equalizer Select!
Select the type of equalizer tliat you wish to use.
2BandEQ:2-band equalizer.
3BandEQ:3-band equalizer.
The 3-band (low, mid,
high) equalizer can be used
on channel faders in only
one mixer mode - either the
Track mixer or Input mixer
- at a time. You cannot use
the equalizer in both
mixers simultaneously on
the same channel. For
example, if you are using
the 3-band equalizer on
Track 1, then you cannot
use it on Input 1.
You cannot change the t)qje
of equalizer of each channel
separately
Press [PLAY (DISPLAY)]. Return to Play condition.
ML