Roland 24 bit Digital Studio Workstation VS-890 - Manual (Page 38)

Making a Multi-Track Recording
Re-Recording a Specified Portion
(Ponch-ln/Punch-Out)
When you listen to a performance that you recorded, you may notice that
even though the overall performance is good, a mistake was made or the
wrong lyrics were sung in just one location. In such cases you can use the
following procedure to re-record just the portion in which the mistake
occurred. This is called Pimch-in/Punch-out.
Although it will appear
that the audio data is
overwritten by this precess,
the data that is no longer
playback is not actually
erased from the hard disk.
This means that the
available recording time
will decrease when you
punch m/punch out. If you
wish to increase the
available recording time,
please read "If "Disk Full!"
appears in the display
(Song Optimize)" (p. 43).
2 1 8 7 6,10 3,9 4,5
Press [FADER (EDIT)] several times to let the FADER
indicator light green. (Track Mixer)
3
4
Hold down [REC] and press the [STATUS] button of the track
that you wish to re-record. [STATUS] will blink red.
Press [PLAY]. The song will be playback.
At the point where you wish to begin re-recording, press
[REC]. [REC] will light red, indicating that recording is
occurring. Begin playing or singing.
When you finish playing or singing, press [REC] once again.
[REC] will go dark, indicating that you have returned to
playback mode.
38