Adjusting the inpuf sensitivity, Adjusting the input sensitivity, Cautions when connecting microphones – Roland 24 bit Digital Studio Workstation VS-890 User Manual
Page 30: Making a multi-track recording
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Making a Multi-Track Recording
Cautions When Connecting Microphones
• Depending on the location of a microphone relative to your speakers,
acoustic feedback (a whitung or shrieking sound) may occur. If this
occurs, take the following steps.
1. Point the microphone in a different direction
2. Move the microphone away from the speaker
3. Lower the volume
Adjusting the Inpuf Sensitivity__________
If you can adjust the volume of the recording source (mixer or electronic
musical instrument) connected to the VS-890, you should adjust the volume
of the recording source to set the recording serrsitivity. If you cannot adjust
the volume on the recording source, or if you wish to make fine adjustments
to the recording sensitivity, use the foOowing procedure.
6,r
1
2
Roland
0
0 0 0
o o o a C3
a □
□
St
№
□ =
Press
[PLAY (DISPLAY)].
Hold down
[SHIFT]
and press
[PLAY [DISPLAY]
several
times until "Pre Level" appears in the display.
,
;......
,
..........
.
■
■■
.
■
■■■■■■
Press
[FADER (EDIT)]
several times to let the FADER
indicator light orange. (Input Mixer)
AO