Roland 24 bit Digital Studio Workstation VS-890 - Manual (Page 33)

Making a Multi-Track Recording
In Play condition, if you continue holding [STATUS] for a short time longer,
you can check wliich source is assigned to each track.
Assigned sources 1-8 (upper line)
Assigned tracks 1-8 (lower line)
CONOmON MARKEF
PL'V
MEASURE BEAT
1 1
SYNC MODE SCE№
I NT —
№UAIMNO TIME
294„40E
Assign ***■
1 2 3 4 S E
Recording Tracks (1-8)
V.
Stereo In (first line)
Effect 1 (second line)
Effect 2 (third line)
CONDCTION MARKER«
SVS MasterClk=DIGIN2
MEASUfC BEAT T
Press [FADER (EDIT)] several times to let the FADER
indicator light green. (Track Mixer)
Raise and lower channel fader 1 to verify that the volume
changes. The track channel fader is used for monitoring. It
does not affect the recording level. Even if you hear no sound,
you can still record. Adjust the volume to a suitable level for
listening.
Press [REC]. The [REC] indicator will blink red.
Press [PLAY]. The [PLAY] indicator will light green, and
recording will begin. Start playing your electric guitar.
When you finish playing, press [STOP].
For each track whose [STATUS] is blinking red, press the
[STATUS] button several times to make it light green.
You can make indicator
light green to hold down
[STOP] and press
[STATUS].