Roland 24 bit Digital Studio Workstation VS-890 - Manual (Page 84)

Using Effects
10,14 13,17,20
sr'ii
V
11 9 12,16 18
Raise and lower channel fader 3, and verify that the volume
changes. The track channel fader is used for monitoring. It
does not affect the recording level. You can record even if no
sound is heard. Adjust the fader to a comfortable volume for
listerung.
Press [FADER (EDIT)] several times to let the FADER
indicator light orange. (Input Mixer)
Press the [SELECT (CH EDIT)] button of the channel to which
you wish to apply the effect. For this example, press the input
channel 1 [SELECT (CH EDIT)] button. [SELECT (CH EDIT)]
will light.
i':
. ■■■'
r:
■
.
■ ■ ■ ■ ■ ■
.
'V
Hold down a [SHIFT] and press [EFFECT-1 (CH EDIT)].
Use the TIMEAf ALUE dial to turn the effect on/off. Select
either "PreFade" or "PstFade.
84