Using effects, Applying a send/return type effect during playback – Roland 24 bit Digital Studio Workstation VS-890 User Manual
Page 73
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using Effects
The effect is installed in the VS-890, up to 2 high-quality stereo effects will
be available for your use.
Applying a Send/Return Type Effect
During Playback
It is conimon to apply a send/return type effect such as reverb or delay
during playback. The following example shows how you can apply reverb
(FXl) to track 1 during playback.
4
1
If Direct Out is turned
"On,' it is not possible to
hear the sound of the effect
form MASTER jack and
AUX jack. (They can heard
in the headphones.) Here,
set the Direct out to "Off."
1
2
Press
[PLAY (DISPLAY)].
Select the track(s) for playback. Hold down
[STOP]
and press
the track 1
[STATUS]
button.
[STATUS]
will light green.
Press
[FADER (EDIT)]
several times to let the FADER
indicator light green. (Track Mixer)
Press the
[SELECT (CH EDIT)]
button for the track channel to
which you wish to apply the effect. For this example, press the
track channel 1
[SELECT (CH EDIT)]
button.
[SELECT (CH EDIT)]
will light.