Roland 24 bit Digital Studio Workstation VS-890 User Manual
Page 86
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using Effects
26
25
22,24
28 27
After you have selected an effect, press
[YES (ENTER)].
CONOmON
MARKER»
FH
1
Se
1
=RU
:Lar9eHa11 U
MEASURE BEAT
22
Press
[FADER (EDIT)]
several times to let the FADER
indicator light red. (Effect Return Mixer)
Raise and lower channel fader 7 (FX 1 RTN), and verify that
the effect return volume changes. The input channel fader is
used to make fine adjustments to the recording level. Set it to
an appropriate position.
At this time, the return
signal from the effect will
no longer be output
directly to the master out.
Assign the effect return to the recording track. Press
[FADER (EDIT)]
several times to let the FADER indicator light
green. (Track Mixer)
86