Roland 24 bit Digital Studio Workstation VS-890 - Manual (Page 32)

Making a Multi-Track Recording
4
Press [FADER (EDIT)] several times to let the FADER
indicator light orange. (Input Mixer)
Raise and lower channel fader 1, and verify that the volume
changes. The input channel fader is used to make fine
adjustments to the recording level. In order to record with the
optimal audio quality, you should normally set the fader at
OdB.
Select the recording track. Hold down [REC] and press the
[STATUS] button of the desired track. For this example, hold
down [REC] and press the track 1 [STATUS] button.
[STATUS] will blink red. (ready to record)
Select the source that will be recorded to the track. Hold down
the
[STATUS] button of the track you wish to record, and
press the [SELECT (CH EDIT)] button of the input channel
that you wish to assign as the source. For this example, hold
down track 1
[STATUS] and press input channel 1
[SELECT (CH EDIT)]. [SELECT (CH EDIT)] so that it blinks.
At this time, the sound of
input channel 1 will no
longer be output directly
from master out
32