Roland 24 bit Digital Studio Workstation VS-890 - Manual (Page 127)

Saving Songs to CD-RW Discs
If you wish to save the current song, press [YES (ENTER)]; if
not, then press [NO (CANCEL)]. If you have selected a
protected song, then press [NO (CANCEL)].
The VS-890 displays the SCSI ID number of the connected CD
recorder for a set time, then "CDR Bak=" appears in the
display.
Use the TIME/VALUE dial to select the song on the CD-R disc
to which you wish the song saved, then press
PARAMETER [ ►► ]. To backup all songs from the current
drive, select "All."
Song Number Song Name
COrCITKDN
CDR Bal
MEAStWE №AT
No.
SYNCMCWE SCENE
44k MT2
2'ii4.40Si
Sample Rate
CONDITION WRKEH»
CDRB.3k=fill Son9 00^
MEASlffC BEAT »
No. fill II
SYNC MOCK SCENE
IKMAim«3t»E
294.400.11
i 2 3 4 5 0 7 8
INPUT/TRACK
Recording Mode
"+Verify=" appears in the display. Rotate the
TIME/VALUE dial to select "On" or "Off," and press
PARAMETER [ ► ► ].
f
CWDiTION MARKER*
SN8 +Uerify=
MEASU№ BEAT
Dn
+Verify
If this is turned "On," verification will be performed after the song data has
been backed up, to check whether or not the data was saved correctly.
Total number of songs in the current drive (3 songs)
The contents of the
protected songs cannot be
changed or overwritten
(Song Protect; p. 66). You
cannot save operation with
the protected songs. This
means if you press
[YES (ENTER)]
at Step 5
when a protected song is
selected, the message
"SONG Protected" ivill
appear, and the procedure
cannot be continued.
If as a result of the
"+Verify" operation you
receive a warning that the
song data was not written
correctly, please make a
backup on another disc.
When backing up to a
CD-R, we recommend that
you also execute +Verify to
check whether the data was
backed up correctly. Since
+Verify checks the entire
CD-RW disc, the operation
will take a certain amount
of time.
"CD Speed=" appears in the display. Rotate the
TIME/VALUE dial to select the backup speed (xl, x2 and x4).
CONOmON MARKER*
CDRCD Speed=
NEASURE BEAT
A
Depending on the disc, it
may not be possible to back
up reliably to a CD-R disc
with a setting of "x4" or
"x2." In such cases, select
"xl." Also, if you insert a
CD-RW disc into a CD-RW
drive, select "x2."
1 OT