Making a multi-track recording, Play (display), System – Roland 24 bit Digital Studio Workstation VS-890 User Manual
Page 57: Yes (enter), Parameter, Timea/alue dial, Masterclk (master clock)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Making a Multi-Track Recording
Press
[PLAY (DISPLAY)].
Press
[SYSTEM]
several times until "SYS System PRM ?'
appears in the display.
Press
[YES (ENTER)].
Press
PARAMETER
[ ►► ] several times until "SYS
MasterClk =" appears in the display.
Rotate the
TIMEA/ALUE dial
to switch the master clock.
Press
[YES (ENTER)].
CONOmON
MARKER#
SVS riast.erClk=DIGIN2 L
b
li№ASUnE BEAT
MasterClk (Master Clock)
This sets the VS-890's reference clock. In this case, select "DIGINl" or
"DIGIN2."
INT:
Based on the VS-890's reference clock.
DIGINl: Based on tlie digital signal received from the COAXIAL IN
connector.
DIGIN2: Based on the digital signal received from the OPTICAL IN
connector.
Press
[PLAY (DISPLAY)].
Return to Play condition.
K7