Using effects, Shift, Effect-2 (ch edit) – Roland 24 bit Digital Studio Workstation VS-890 User Manual
Page 89: Parameter, Timea/alue dial, Effect, Yes (enter), Time/value dial, Play (display)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using Effects
Hold down
[SHIFT]
and press
[EFFECT-2 (CH EDIT)].
Press
PARAMETER
[ ◄◄ ]. "FX2 Ins =" appears in the
display.
Rotate the
TIMEA/ALUE dial
to turn the effect on/off. Select
"Insert."
If the display indicates
"FX2—tlie effect (FX2) is
inserted into another
channel, and therefore
cannot be inserted into this
channel (p. 91). Either turn
off effect insertion for the
channel that is using the
effect; or insert a different
effect into this channel.
8
CONDITION MARKER*
TRl
F K 2
Ins
U6AS№E BEAT
1
1
1
STNCMOOE SC8«E S
INT---- ;
reMAMNQTms a
294.400.:
= Insert
I g 3 s e 7- e AB i_R
INPUT/TRACK
MASTER
Press
[EFFECT]
several times until "EFFECT-2 PRM ?"
appears in the display.
Press
[YES (ENTER)].
The number and name of the currently
selected effect will be displayed, and you will be able to select
the effect.
Rotate the
TIME/VALUE dial
to select the effect you wish to
use. For this example, select an effect such as
"B28=MS:DR20->87."
CONE»TiON MARKER*
FX2 B28=MS: DR20-^87
l№ABU№ BEAT
After you have selected an effect, press
YES (ENTER)].
Preparations are now complete. Press
[PLAY (DISPLAY)]
to
return to Play condition.
on