Roland 24 bit Digital Studio Workstation VS-890 - Manual (Page 39)

Making a Multi-Track Recording
7
8
6
Press [STOP], The song will stop.
Hold down [STOP] and press the [STATUS] button of the
track that you have re-recorded. [STATUS] will light green.
To listen to your recording, press [ZERO]. You will return to
the beginning of the song.
Press [PLAY]. The song will be playback. Use the channel
faders and master fader to adjust the volume to a comfortable
level.
When playback ends, press [STOP].
Erasing Just a Portion of a Recording (Track Erase)
If instead of re-recording the portion where a mistake was made, you simply
wish to erase the mistake, use the following procedure. The result will
sound the same as recording silence over the unwanted section, without
using additional disk space.
For details refer to
"Recording Over a Portion
of a Performance
(Punch-In/Punch-Out)"
(Owner’s Manual p. 53).
If you wish to have the
Punch-In/Pundi-Out
function performed
automatically, see "Specify
Beforehand the Location
for Re-Recording (Auto
Punch-In)" (Owner's
Manual p. 55).
To record over the same
section of a song a
repeatedly, please refer to
"Repeatedly Recording
Over the Same Area (Loop
Recording)" (Owner's
Manual p. 56).
Press [PLAY (DISPLAY)].
no