Roland 24 bit Digital Studio Workstation VS-890 - Manual (Page 139)

Appendices
Change partitions (Drive Select)
2
3
Each partition on the VS-890's disk drive is treated as an independent drive,
with each partition automatically given a partition number (0-9). When a
single hard disk has multiple partitions, you can specify which partition of
which drive will be used. This disk drive partition currently used is referred
to as the current drive.
Press [SYSTEM] several times until "SYS Drive Select"
appears in the display.
Press [YES (ENTER)].
Rotate the TIMEA^ALUE dial to select the disk drive to which
you want to change. The internal hard disk will be shown as
"IDE:*," and external disk drives will be shown as
"SC0:*-SC7:*." The number following each disk drive
indicates the partition number. For example if you wish to
switch to the Zip drive, select "SC5:0."
The Roland HDP88 series
hard disk can be installed
in the VS-890. In order to
take full advantage of the
VS-890's functionality for
the number of tracks that
can be recorded/playback
simultaneously, we
recommend that you install
an 2100 MB or higher
model.
If you wish to use hard
disks or song data on both
the VS-890 and the VS-880/
880EX/1680, because of
factors such as differing
partition sizes and
numbers of tracks, there
will be limitations as to
what you can do. For more
detailed information,
please .see "Compabbihty"
(Owner's Manual).
i CONDITION MMIKEB« ||mm||||||Qg||||||||||||^g Ì
SVS Select Dru=IDE:1 |J
ii№ASURE BEAT T | |
1