Appendices – Roland 24 bit Digital Studio Workstation VS-890 User Manual
Page 134
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Appendices
Confirming That a Drive is Not
Damaged (Drive Check)
You can check the drive you are using to make sure it can be read correctly.
This is referred to as Drive Check.
This provides a way to determine whether a failure during Song Copy
(Owner's Manual "Song Condition") or CD-R Backup (p. 126) is due to a
problem in the song itself that was saved on disk, whether the problem is
with the connections, or if there is a problem of some other kind. If data
cannot be read correctly, the display will indicate the song in which the error
occurred.
1
2
3
Press
[SYSTEM]
several times until "SYS Drive Check ?'
appears in the display.
Press
[YES (ENTER)].
Rotate the
TIME/VALUE dial
to select the drive that you wish
to check.
Press
[YES (ENTER)].
A confirmation message ask you that
you want to proceed with the Drive Check appears in the
display.
134