Roland 24 bit Digital Studio Workstation VS-890 - Manual (Page 82)

Using Effects
Applying a Send/Return Type Effect
While You Record
Here we will give an example of how a send/return type effect such as
reverb can be applied to the somce of the INPUT 1 jack, and the direct sound
and effect socmd recorded together on track 3. This is the method you will
use when, for example, you wish to apply reverb to a vocal and record both
the direct sound and effect sound together.
'
■ .
■■■ . ■ ■ ■ ■ ■ ■ ■
1
2
Press [PLAY (DISPLAY)].
Hold down a [STATUS] button (of any track) and press
[CLEAR]. The assignments of input sources to tracks will be
cleared.
■
^ ^ Li'"::'
'
:Г5
As described in Adjusting the Input Sensitivity (p. 30)'
adjust the recording level.
. .
Select the track that you wish to record. Hold down [REC],
and press the [STATUS] button of the track that you wish to
record. For this example, hold down [REC] and press the track
3 [STATUS] button. [STATUS] will blink red.
82