Using effects, Select (ch edit), Shift – Roland 24 bit Digital Studio Workstation VS-890 User Manual
Page 87: Assign (ch edit), Timeaf alue dial, Yes (enter), Play (display), Recording on a track, Signal flow froutina
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using Effects
25
Press the
[SELECT (CH EDIT)]
button of the channel to which
you wish to apply the effect. For this example, press the track
channel 3
[SELECT (CH EDIT)]
button.
[SELECT (CH EDIT)]
will light.
Hold down
[SHIFT]
and press
[Assign (CH EDIT)].
Rotate the
TIMEAf ALUE dial
to select the effect return that you
wish to record, and press
[YES (ENTER)].
For this example,
select "FXl" and press
[YES (ENTER)].
Preparations are now complete. Press
[PLAY (DISPLAY)]
to
return to the Play condition.
As described in
"Recording On a Track
(p. 31)", record a
performance and then listen to it.
Signal Flow fRoutina^
I INI EFFECT t= PstFadel IRTNFKI RTNLeu = 10B1
FX1 Sw
FX1
Level
INI
Level
IHST HasterLevel" 1001
-XJ)-
TR3
Level
Level
IINI mx Level =
10^
|TR3t1IX Level =
iee1
OUTPL
' (MAST!
07