Roland 24 bit Digital Studio Workstation VS-890 User Manual

Page 131

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Saving Songs to CD-RW Discs

If you selected "All" in step 6, tlie display will indicate "INIT

**=i=;* OK ?" (OK to initialize the disk drive?). "***:*" is the ID

number and partition number of the recover destination disk

drive. For example when recovering to partition 0 of the

internal hard disk drive, the display would indicate "IDE:0."

If you wish to initialize the current drive and then recover,

press

[YES (ENTER)].

If at this point you press

[YES (ENTER)],

all songs saved on the internal hard disk will

be lost. If you decide not to initialize, press

[NO (CANCEL)].

Normally you should press

[NO (CANCEL)].

Execute the load. When over multiple discs, the disc is ejected,

"Insert Disc #" (# indicates the number in the order of

insertion) appears in the display. Insert the next disc and press

[YES (ENTER)].

When the CD-R recover procedure is finished, return to Play

condition.

1 '»1