Mixer and system initialize, Preparations, System – Roland 24 bit Digital Studio Workstation VS-890 User Manual
Page 13: Yes (enter), No (cancel)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Preparations
Mixer and System Initialize
You
can
restore
the
default
parameter
settings
of
a
song.
This
is
convenient
w'hen you have made many changes to the Input Mixer, the Track Mixer, tlie
Master Block, as well as changes in the System Menu screens, and you want
to quickly restore the VS-890 to its default settings.
1
After initializing mixer and
system settings, many
settings will not be
affected. Some of the
settings that are not
affected by Mixer and
System Initialize include
song. Scene, tempo map,
and sync track data.
Additionally, the IDE
drive, SCSI ID, Scene
Mode, Shift Lock, and
Numerics T}qje settings are
not changed as a result of
Mixer/System Initialize.
2
3
Press
[SYSTEM]
several times until "SYS System PRM ?"
appears in the display.
Press
[YES (ENTER)].
Press [◄◄][►►] several times until "Init Mix/SysPRM ?"
(Do you want to restore the initial mixer and system
parameters ?) appears in the display.
Press
[YES (ENTER)].
A message will ask you to confirm that
you really want to restore the mixer to the initial setting. If you
want to cancel the operation, press
[NO (CANCEL)].
Press
[YES (ENTER)].
To Cancel the operation press
[NO (CANCEL)].
When the mixer settings return to the initial
state, you will be in Play condition.