Roland 24 bit Digital Studio Workstation VS-890 - Manual (Page 95)

Using Effects
In Play condition, if you continue holding [STATUS]([l]-[8]; any track is
OK) for a time, you can see the source and effect return that is assigned to
the track.
Assigned sources 1-8 (upper line)
Assigned tracks 1-8 (lower line)
Stereo In (first line)
Effect 1 (second line)
Effect 2 (third line)
Jr
Select the source that will be recorded on the track. Hold down
the
[STATUS] button of the track that you wish to record, and
press the [SELECT (CH EDIT)] button of the input channel
that you wish to assign as the source. For this example, hold
down the track 1
[STATUS] button, and press the input
channel 6 [SELECT (CH EDIT)] button so it begins to blink.
At this time, the sound of
input channel 6 will no
longer be output directly
from master out.
Raise and lower channel fader 1, and verify that the volume
changes. The track channel fader is used for monitoring. It
does not affect the recording level. You can record even if no
sound is heard. Set the fader to a comfortable level for
listening.
As described in "Recording On a Track (p. 31)", record your
performance and listen to the result.
OE