Flintec FT-10xx - Manual (Page 38)

FT-10 Smart Process Indicator, Technical Manual, Rev. 1.0, January 2014
[704 0] Output 5 (only FT-10, FT-10 MB, FT-10 PB, FT-10 PN, FT-10 EN and FT-10 CO)
Refer to Table 5.1 to select the output function.
0 : No function on output 4
1 : Threshold (Active High)
2 : Threshold (Active Low)
3 : Window (Active High)
4 : Window (Active Low)
5 : Fieldbus output
5.5.3 Metrological Data Block [8--]
The parameters about Metrologic Registry are being entered in this section.
[80-] Legal Metrologic Records
[800] Counter
This counter increases by 1 automatically after entering the programming mode with calibration DIP
switch. This counter cannot be changed manually.