EVCO c-pro mega RACK - Manual (Page 8)

C-PRO MEGA RACK & C-PRO GIGA RACK APPLICATION MANUAL
Page 8
2 APPLICATIONS
Using the CAN protocol, it is possible to connect an 8 relay (C-PRO EXP MEGA) or 13 relay
(C-PRO EXP GIGA) expansion module to the controllers.
Management of four different types of control unit is envisaged:
1) Application 1: C-PRO MEGA RACK (for single circuit control units; C-PRO MEGA
RACK preset configuration)
Total No. of digital outputs = 8
Total No. of digital inputs = 10
Total No. of analogue inputs = 8
Total No. of analogue outputs = 4
2)
Application 2: C-PRO GIGA RACK (for dual circuit control units; preset
configuration)
Total No. of digital outputs = 13
Total No. of digital inputs = 12
Total No. of analogue inputs = 8
Total No. of analogue outputs = 4
3)
Application 3: C-PRO MEGA RACK + C-PRO EXP MEGA (e.g. for dual circuit
control units)
Total No. of digital outputs = 8 + 8 = 16
Total No. of digital inputs = 10 + 8 = 18
Total No. of analogue inputs = 8 +4 = 12
Total No. of analogue outputs = 4
4)
Application 4: C-PRO GIGA RACK + C-PRO EXP GIGA (e.g. for dual circuit control
units)
5) Total No. of digital outputs = 13 +13 = 26
Total No. of digital inputs = 12 +10 = 22
Total No. of analogue inputs = 8 +4 = 12
Total No. of analogue outputs = 4