EVCO c-pro mega RACK - Manual (Page 11)

C-PRO MEGA RACK & C-PRO GIGA RACK APPLICATION MANUAL
Page 11
2.3 Application 3: use of the C-PRO MEGA RACK with the C-PRO
EXP MEGA I/O expansion unit (dual circuit control unit with
separate condensation)
The C-PRO MEGA RACK is pre-configured to control single circuit compressor packs; the
services mentioned in the figure below refer to an example of a dual circuit control unit with
separate condensation.
Compressors 1, 2 and 3 appertain to circuit 1; compressors 4, 5 and 6 appertain to circuit 2.
Fans 1, 2 and 3 appertain to circuit 1; fans 4, 5 and 6 appertain to circuit 2.
The C-PRO MEGA RACK and C-PRO EXP MEGA power supplies must be galvanically
isolated from one another.