EVCO c-pro mega RACK - Manual (Page 48)

C-PRO MEGA RACK & C-PRO GIGA RACK APPLICATION MANUAL
Page 48
PF72
Floating
condensation
offset
Floating condensation
temperature variation offset
0.0 -20.0 20.0 °C IS-F
PF73
Set floating
condensation
min.
Minimum floating
condensation limit value
30.0 10.0 45.0 °C IS-F
PF74
Set floating
condensation
max.
Maximum floating
condensation limit value
40.0 10.0 45.0 °C IS-F
PF78
Side band step
overlap Fan side band step overlap
factor
0 0 100 % IS-F
PH01
Minimum full-
scale suction Sets the minimum full-scale
value for the suction probe
-0.5 -10.0 PH02 Bar IS-V
PH02
Maximum full-
scale suction Sets the maximum full-scale
value for the suction probe
7.0 PH01 45.0 Bar IS-V
PH03
Minimum full-
scale supply Sets the minimum full-scale
value for the supply probe
0.0 -10.0 PH04 Bar IS-V
PH04
Maximum full-
scale supply Sets the maximum full-scale
value for the supply probe
30.0 PH03 45.0 Bar IS-V
PH05
System ON/OFF
from keypad
Enables switching the
machine on/off by pressing
the ESC key
YES NO (0) YES (1) IS-V
PH06
Circuit ON/OFF
from keypad
Enables switching circuits
on/off by pressing the
relevant key
NO NO (0) YES (1) IS-V
PH07
System ON/OFF
from DI
Enables switching the
machine on/off from the
digital input
NO NO (0) YES (1) IS-V
PH08
Circuits ON/OFF
from DI
Enables switching circuits
on/off from the relevant
digital input
NO NO (0) YES (1) IS-V
PH09
System ON/OFF
from supervisor
Enables switching the
machine on/off from the
supervisor
NO NO (0) YES (1) IS-V
PH10
Circuits ON/OFF
from supervisor Enables switching circuits
on/off from the supervisor
NO NO (0) YES (1) IS-V
PH11 Modbus address Card Modbus address 1 1 247 IS-V