EVCO EPV4CBR Hardware manual - Manual (Page 8)

EVCO S.p.A. Vcolor | Hardware manual ver. 1.0 | Code 144VCOE104
page 8 of 38
2.4 Wall mounting
The following drawing shows the wall mounting of the devices (in wall mounting support CPVW00 EVCO, to order separately).
Through the frontal plates CPVP EVCO (to order separately) or the plates belonging to the series "Living" and to the series "Light"
BTicino it is possible to integrate the devices both in residential and commercial environments.
2.5 Additional information for installation
- make sure the working conditions of the device (operating temperature, operating humidity, etc.) are in the limits
indicated; look at chapter 10 “TECHNICAL DATA”.
- do not install the device close to heating sources (heaters, hot air ducts, etc.), devices having big magnetos (big speakers,
etc.), locations subject to direct sunlight, rain, humidity, dust, mechanical vibrations or bumps
- according to the safety legislation, the protection against possible contacts with the electrical parts must be ensured by a
correct installation of the device; all the parts which ensure the protection must be fixed so that you can not remove them
if not by using a tool.