EVCO EPV4CBR Hardware manual - Manual (Page 25)

EVCO S.p.A. Vcolor | Hardware manual ver. 1.0 | Code 144VCOE104
page 25 of 38
7.7 List of the configuration parameters
7.7.1 Configuration parameters of the menu “Info”
The following table shows the meaning of the configuration parameters of the menu “Info”.
PARAM. MIN. MAX. U.M. DEF. DESCRIPTION
PROJ parameter available in read only mode information on the application project (project, version and revision)
FW parameter available in read only mode
information on the firmware (code, version, revision and under
revison)
HW parameter available in read only mode
information on the hardware (version, revision, generic (G) or
special (S))
SW parameter available in read only mode
information on the development environment UNI-PRO 3 (version
and revision)
SN parameter available in read only mode
informazioni relative al serial number e all’esito del collaudo
produttivo
DATE parameter available in read only mode date and time of the last compiling of the application project
7.7.2 Configuration parameters of the menu “Languages”
The following table shows the meaning of the configuration parameters of the menu “Languages”.
PARAM. MIN. MAX. U.M. DEF. DESCRIPTION
English parameter available in read only mode
showing the words of the application software in English (if
foreseen)
Italiano parameter available in read only mode
showing the words of the application software in Italian (if
foreseen)
Français parameter available in read only mode
showing the words of the application software in French (if
foreseen)
Español parameter available in read only mode
showing the words of the application software in Spanish (if
foreseen)
Deutsch parameter available in read only mode
showing the words of the application software in German (if
foreseen)
Russian parameter available in read only mode
showing the words of the application software in Russian (if
foreseen)
Português parameter available in read only mode
showing the words of the application software in Portoguese (if
foreseen)