EVCO EPV4CBR Hardware manual User Manual
Page 3
EVCO S.p.A.
Vcolor | Hardware manual ver. 1.0 | Code 144VCOE104
page 3 of 38
Index
1
INTRODUCTION .............................................. 4
1.1
Introduction ................................................... 4
1.2
Summary table of the available models, the main
features and the purchase codes ....................... 5
2
SIZE AND INSTALLATION ................................. 6
2.1
Size ............................................................... 6
2.2
Panel mounting ............................................... 6
2.3
Built-in mounting ............................................ 7
2.4
Wall mounting ................................................ 8
2.5
Additional information for installation ................. 8
3
WIRING DIAGRAM ........................................... 9
3.1
Connectors ..................................................... 9
3.2
Meaning of connectors ..................................... 9
3.3
Plugging-in the line termination of the RS-485
network with MODBUS communication protocol 10
3.4
Plugging-in the line termination of the CAN
network with CANBUS communication protocol . 11
3.5
Polarizing the RS-485 network with MODBUS
communication protocol ................................. 11
3.6
Example of wiring diagram ............................. 12
3.7
Additional information for wiring diagram ......... 13
4
DESCRITPION ............................................... 14
4.1
Description of the front .................................. 14
4.2
Description of the back .................................. 15
5
FIRST USE .................................................... 16
5.1
First use ....................................................... 16
6
PRELIMINARY INFORMATION .......................... 17
6.1
Switching on/off the device ............................ 17
6.2
Access to the menu “Info”, “Diagnostic” and
“Debug” ....................................................... 17
7
CONFIGURATION .......................................... 18
7.1
Setting the date and the time ......................... 18
7.2
Setting the language for showing (if foreseen) the
words of the application project ...................... 19
7.3
Setting the configuration parameters of the menu
“Parameters” ................................................ 19
7.4
Setting the configuration parameters of the menu
“Networks” ................................................... 20
7.5
Uploading and downloading the configuration
parameters................................................... 21
7.6
Configuring an element of a CAN network with
CANBUS communication protocol .................... 24
7.7
List of the configuration parameters ................ 25
8
SIGNALS ...................................................... 31
8.1
Signals ........................................................ 31
9
ACCESSORIES .............................................. 32
9.1
Connecting cables 0810500018/0810500020 .... 32
9.2
Frontal plates CPVP ....................................... 32
9.3
Wall mounting support CPVW00 ...................... 32
9.4
Gasket 0027000007 ...................................... 33
10
TECHNICAL DATA .......................................... 34
10.1
Technical data .............................................. 34