EVCO EPV4CBR Hardware manual - Manual (Page 4)

EVCO S.p.A. Vcolor | Hardware manual ver. 1.0 | Code 144VCOE104
page 4 of 38
1 INTRODUCTION
1.1 Introduction
Vcolor is a range of programmable remote user interfaces.
Through the interfaces it is possible to manage the
programmable controllers belonging to the c-pro 3 range also
at a distance, in particular the blind versions.
The user interface consists of a color touch-screen TFT graphic
display, it can be developed through the UNI-PRO 3
development environment and guarantees an IP40 protection
rating (IP65 in case of panel mounting with gasket
0027000007, to order separately), for easy cleaning.
They can work both as browser of programmable controllers
(browsers) and in commander mode, getting the controllers
(slaves) to serve the commands coming from the interface.
The interfaces can easily be integrated both in residential and
in commercial environments; at their front it is possible to
apply the frontal plates CPVP EVCO (to order separately) or
the plates belonging to the series "Living" and to the series
"Light" BTicino.
Installation is by panel, built-in (in box like “506e” BTicino) or
by wall (in wall mounting support CPVW00 EVCO, to order
separately).