EVCO EPV4CBR Hardware manual - Manual (Page 23)

EVCO S.p.A. Vcolor | Hardware manual ver. 1.0 | Code 144VCOE104
page 23 of 38
13. Press and release the area “DOWN” to select
“Save on USB” or “Save on memory” (according
to the option selected in step 9).
14. Press and release the area “ENTER”: it will be
started the download of the configuration
parameters.
The download takes typically a few seconds; if the
operation is not completed succesfully, the display
will show an error indication (for example “Status:
Read Error”).
To quit the procedure, operate as follows:
15. Press and release over and over again the area
“ESCAPE”.