EVCO EPV4CBR Hardware manual - Manual (Page 28)

EVCO S.p.A. Vcolor | Hardware manual ver. 1.0 | Code 144VCOE104
page 28 of 38
Press and release key “RIGHT” to show the section “CAN Status” of the submenu “CAN bus” of the menu “Networks” .
PARAM. MIN. MAX. U.M. DEF. DESCRIPTION
Cnt Rx parameter available in read only mode reserved
Cnt Tx parameter available in read only mode reserved
Cnt Ovf parameter available in read only mode reserved
Cnt Passive parameter available in read only mode reserved
Cnt Bus Off parameter available in read only mode reserved
BufRx Valid parameter available in read only mode reserved
BufTx Valid parameter available in read only mode reserved
Cnt Tx Err parameter available in read only mode reserved
Cnt Rx Err parameter available in read only mode reserved
Cnt Stuff parameter available in read only mode reserved
Cnt Form parameter available in read only mode reserved
Cnt Ack parameter available in read only mode reserved
Cnt Bit1 parameter available in read only mode reserved
Cnt Bit0 parameter available in read only mode reserved
Cnt CRC parameter available in read only mode reserved
Press and release again key “RIGHT” to show the section “CAN Bit Timing” of the submenu “CAN bus” of the menu “Networks” .
PARAM. MIN. MAX. U.M. DEF. DESCRIPTION
BRP parameter available in read only mode reserved
SJW parameter available in read only mode reserved
T.SEG1 parameter available in read only mode reserved
T.SEG2 parameter available in read only mode reserved