EVCO EPV4CBR Hardware manual - Manual (Page 30)

EVCO S.p.A. Vcolor | Hardware manual ver. 1.0 | Code 144VCOE104
page 30 of 38
7.7.7 Configuration parameters of the menu “Diagnostics”
The following table shows the meaning of the configuration parameters of the menu “Diagnostics”.
PARAM. MIN. MAX. U.M. DEF. DESCRIPTION
EEPROM parameter available in read only mode
status of the non volatile memory
OK = not in error
ERR = in error
RTC parameter available in read only mode
status of the real time clock
OK = not in error
ERR = in error
LOW = loss of data
DISAB = disabled
STACK parameter available in read only mode
status of the stack
OK = not in error
ERR = in error (for overfow)
MATH parameter available in read only mode
status of the math
OK = not in error
ERR = in error (for overfow, for under flow, for division
by zero or for NaN)
KEY PAR parameter available in read only mode
result of the upload and the download of the application software
parameters or of the configuration parameters through the USB
key
OK = operation completed succesfully
ERR = operation not completed succesfully
7.7.8 Configuration parameters of the menu “Debug”
The following table shows the meaning of the configuration parameters of the menu “Debug”.
PARAM. MIN. MAX. U.M. DEF. DESCRIPTION
Main time parameter available in read only mode main cycle time of the application software (in ms)
max time
main
parameter available in read only mode
maximum value of the main cycle time of the application software
(in ms)
free stack
main
parameter available in read only mode minimum main free stack
100ms time parameter available in read only mode reserved
max time
100 ms
parameter available in read only mode reserved
free stack
100 ms
parameter available in read only mode reserved