Comtrol NS-link Windows NT - Manual (Page 93)

Appendix A. Windows NT Configuration Overview 93
Configuring Printers
Configuring Printers
Use this subsection to configure printers for the Comtrol device after installing the
hardware and driver.
Adding Serial
Printers Follow these steps to configure a serial printer in Windows NT:
1. Connect the printer to the desired port. Use a DTE-to-DTE null modem cable
unless the printer maker specifies otherwise.
2. Open the Printers control panel and double-click on
the Add Printer icon.
3. Select the My Computer checkbox, then the Next
button.
4. If the desired COM port is on
this window, select it, select on
the Next button, and skip to
Step 6 .
5. If the desired COM port is not
on this list, select the Add Port
button and follow these steps: