Comtrol NS-link Windows NT - Manual (Page 30)

30 Initial NS-Link Installation
Windows 2000: NS-Link Installation
The second timer defines how long the driver will wait for a response from the
device when a forced release of a port is requested (i.e. as when the Freeport
utility is being used). This timer defaults to 8 seconds. If the TCP Multiplier is
changed to 2, the timer would now be 16 seconds. If the multiplier is 4, the
new timeout period would be 32 seconds.
23. Select the Ok button to close the Device window.
24. Close the Device Manager.
25. Select Shutdown from the Start button and Restart your system for the changes
to take affect.
26. After rebooting, you can go to the appropriate subsection to complete any
further configuration that is required for your site.
• To configure an IP address in the device, go to Programming the IP Address
on Page 47.
• To configure NS-Link in MAC mode to run efficiently, go to Disabling
DHCP Requests (MAC Mode) on Page 54.
• To configure COM port properties, go to COM Port Configuration on Page
63.