Comtrol NS-link Windows NT - Manual (Page 22)

22 Initial NS-Link Installation
Windows XP: NS-Link Installation
28. Close the Device Manager.
29. From the Start button, select Turn off Computer, and Restart your system for
the changes to take affect.
30. After rebooting, you can go to the appropriate subsection to complete any
further configuration that is required for your site.
• To configure an IP address in the device, go to Programming the IP Address
on Page 47.
• To configure NS-Link in MAC mode to run efficiently, go to Disabling
DHCP Requests (MAC Mode) on Page 54.
• To configure COM port properties, go to COM Port Configuration on Page
63.