Comtrol NS-link Windows NT - Manual (Page 61)

Device Configuration 61
Device Advisor Driver Messages
NS-Link device with specified
MAC address was detected,
but is not configured for this
server.
Either the NS-Link device in question is not
assigned to this server, or it is not assigned to any
server, or it has been configured for this server
but the configuration has not been saved. If the
latter, save and exit, and restart the server
NS-Link responsive, but no
data traffic exchange since
last inquiry.
The NS-Link device appears to be installed
correctly and active, but no data traffic has been
sent or received since the last time you clicked the
Refresh button. If there should have been traffic,
check the NS-Link device port configuration and
external cabling.
NS-Link responsive; data
traffic received, but nothing
sent since last inquiry.
Similar to above, except the NS-Link device has
received data successfully.
NS-Link responsive; data
traffic sent, but nothing
received since last inquiry.
Similar to above, except the NS-Link device has
sent data successfully.
Poor connection to NS-Link.
This message displays if retransmissions occur,
frames arrive out of sequence, or more than 2% of
the total packets arrive out of sequence. This
generally indicates a cable, connector, or LAN
termination problem.
SendCode
The server has acquired the NS-Link device and is
in the process of downloading the control software.
Unable to contact a Network
Interface Controller (NIC)
The server NIC card may not be installed, may be
malfunctioning, or may not be bound to the NS-
Link device.
Unable to contact the NS-
Link driver The NS-Link device NS-Link is not installed or is
not responding to Advisor requests.
Undefined No NS-Link devices are configured on this server.
Unintialized NS-Link device has not been installed correctly.
Message Description