Comtrol NS-link Windows NT - Manual (Page 33)

Initial NS-Link Installation 33
Windows NT: NS-Link Installation
8. Select the Comtrol device you are installing.
9. If queried, select the number of ports on this Comtrol device.
10. Select the COM port number for each port you plan to use on this system, if
you do not want to allow access to a specific port for this system, scroll up to
Not configured. When configuring ports among several systems, they can share
the same COM port name or be assigned a unique COM port name on each
system.
See Using the Port Sharing Feature on Page 8 for an overview about port
sharing.
Note: This window is dependent on the number of ports on the device.
This example shows an installation for an RPSH-Si 2-Port.
This window is dependent on the number of ports.