Windows nt: ns-link installation – Comtrol NS-link Windows NT User Manual
Page 31
Initial NS-Link Installation
31
Windows NT: NS-Link Installation
Windows NT: NS-Link Installation
Use this procedure to install and configure the NS-Link device driver for your
device.
1.
If necessary, unzip the self-extracting files from the Comtrol media or ftp/web
site. See
on Page 6, if you need to locate the device
driver.
2.
Right-click on the Network Neighborhood, and select Properties.
3.
Select the Adapters tab and then the Add button.
This manual is related to the following products: