Comtrol NS-link Windows NT - Manual (Page 13)

Initial NS-Link Installation 13
Initial NS-Link Installation
Use the appropriate subsection to initially install NS-Link on your operating
system after verifying that your device is functioning properly, see
Device
Preparation for NS-Link on Page 9.
• Windows XP: NS-Link Installation on Page 13
• Windows 2000: NS-Link Installation on Page 23
• Windows NT: NS-Link Installation on Page 31
If there is a NS-Link driver already installed on your system, see Updating,
Adding, or Removing NS-Link Devices on Page 37 before install the new driver.
Windows XP: NS-Link Installation
Use this procedure to install and configure the NS-Link device driver for your
device.
1. If necessary, unzip the self-extracting files from the Comtrol media or ftp/web
site. See
Locating NS-Link Software on Page 6, if you need to locate the device
driver.
2. From the Start button, select Control Panel, and double-click on the Add
Hardware icon.