Setting the contrast – Brother INSTAFAX FAX2100M User Manual
Page 98
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
V-2. SETTING THE CONTRAST
2.
SETTING THE CONTRAST
(----------- 1
I
wssimi
The unit has an "Auto-Contrast" feature^ so you do not have to
select the contrast setting before sending. However, if you want to
send a very light document, set the contrast to "SUPER LIGHT"
manually.
1) To select the "SUPER LIGHT" contrast mode, first set your
document in the feeder.
2) Press the FUNCTION key followed by the 6 key. The following
message appears.
5.CUKKLMi SETTINGS
PRESS SET KEY
3) Press the SET key followed by the 1 key.
¡.CONTRAST
PRESS SET KEY
I
INTERRUPT
I
T~1
4) Press the SET key. The current contrast setting is displayed.
CURRENT : AUTO
l.AUTO 2.SUPER LIGHT
5) Press the 2 key to select SUPER LIGHT mode.
CONTRAST ; SUPER LIGHT
PRESS SET KEY
STOP
6) Press the SET key to confirm your selection. Then press the
I
STOP key.
7) Now you can send your transmission or make your copy.
- This setting is only effective for one transmission or copy
operation.
V-2-1