Brother INSTAFAX FAX2100M - Manual (Page 95)

}/. Advanced uses
1. RESOLUTION
There are four different resolution settings available-STANDARD,
FINE, SUPER FINE, and PHOTO. Note that the photo mode on the
InstaFAX2200M is always in super gray scale. The standard
resolution is adequate for sending ordinary text documents. Fine
resolution is intended for the transmission of graphic images and
documents that have small print. SUPER FINE is for use with
finely-detailed graphic images such as complex line drawings and
similar artwork. PHOTO resolution mode is specifically designed
for the transmission of
photographic images. The photo mode in
the InstaFAX2200M (super gray scale) improves upon the normal
photo mode by allowing the transmission of text on the same
document with a photo without any loss of text
clarity. Tt also
prevents patterns from forming in the photo image. Whichever
mode you use, the quality of the printed document's at the distant
location will not be adversely affected.
You can select a resolution setting in two ways. Firstly, you can
press the RESOLUTION key on the key panel prior to sending your
document and light the LED corresponding to the resolution mode
you want to select. Your document is then transmitted using the
same resolution mode you have selected. Secondly, you can use the
CURRENT SETTING function to select a resolution setting for each
page of a document individually. Both setting methods will be
effective for one transmission only. If the receiving fax machine
cannot print at the resolution that you specified, transmission will
take place at a lesser resolution. (The resolution LEDs change to
show you which resolution is being used to print the current
document or page that you are sending is being printed.)
- "Super Fine" resolution can only he used between Brother
machines.
- If no LED is lit, the unit is in standard resolution.
Single resolution
transmission
\FtNE
]S.FINE
1
PHOTO
START
Place your document in the document feeder and dial the number
as you do for an ordinary fax transmission. Before pressing the
START key select a resolution by pressing the RESOLUTION key.
Press once for FINE mode, twice for SUPERFINE and three times
for PHOTO mode. Pressing the
RESOLUTION key fourth time
returns the machine to the standard resolution mode. There are
three LED lights positioned next to the
RESOLUTION key to
indicate the current resolution setting. If all three are not lit, the unit
will transmit at the standard resolution. For each of the other three
resolution modes, the appropriate light comes on when the mode
has been selected.
When you have selected the resolution mode press the START key.
Your document will be sent at the specified resolution.
_______________________________________________________
V-1-1