Setting the f/t ringing period, L_____j, User options press set key – Brother INSTAFAX FAX2100M User Manual
Page 63: F/t - ring time press set key, F/t-ring time : 20secs press set key
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
IV-1. CONFIGURING THE MACHINE
Setting the F/T ringing
period
I-------- 1
!
I - I
L_____J
I-------------------T
I
INTERRUPT
I
I---------------------
1
ML
ZED
;-----------1
I
INTERRUPT
I
- The cost of the transmission (borne by the sending party) will be
calculated from the point in time at which the beep signals that
the line connection has been made.
- After beep signal, there is no sound for about 4 seconds to detect
a CNG which is sent by other party, until the line is disconnected.
You can select the F/T Ringing period by following the procedure
below.
- The initial setting is 30 seconds.
1) Press the FUNCTION key. Then press the 5 key.
5.USER OPTIONS
PRESS SET KEY
2) Press the SET key. Then press the 0 key followed by the 5 key.
05.F/T - RING TIME
PRESS SET KEY
3) Press the SET key.
CURRENT : 30SECS.
1.10
2.20
3.30
O , r-n
DEF
■ r r~3~n
4) Press the 1 key to select 10 seconds, the 2 key for 20 seconds, or
the 3 key for 30 seconds.
F/T-RING TIME : 20SECS
PRESS SET KEY
5) Press the SET key to confirm your selection.
IV-1-9