Brother INSTAFAX FAX2100M - Manual (Page 81)

lV-4. USING ONE-TOUCH NUMBERS
nrni 0 II-O
1
INTERRUPT
1
OLIOIZO
7) Enter the members of your new group using already registered
speed dial numbers and one-touch keys (you can include up to
129 stations in one group fur 2100M and 159 stations in one
group for 2200M). The name of each destination is shown as you
enter it on the lower line. The one-touch or speed dial numbers
that you have entered are shown on the upper line. After each
entry the cursor key must be pressed to lock in that entry.
-
A one-touch number xvill he represented by a** * " in front of the
one-touch location number. Speed dialing numbers are represented
by a in front of the speed dial location number.
G01:#02#04±07
FRENCH OFFICES
8) Press the SET key to confirm your group selection.
NAME:_
INPUT / PRESS SET TO END
9) Enter a name for the new group using the number keys (within
24 characters).
NAME:EUROPEAN 0FFICES_
INPUT / PRESS SET TO END
10) Press the SET key.
Sending one-touch
faxes
To send a fax to a destination whose number is stored under a one-
Louch key simply follow the steps for sending a fax, either manually
or automatically, and instead of dialing the number with the keys
just press the relevant one-touch key (or hold down the shift key
and press the one-touch key). The stored fax number is dialed
automatically. To begin transmission just press the START key.
Printing a list of
one-touch numbers
tsUHAiMJt I
]
To print out a directory listing of the names and numbers stored as
one-touch dial numbers.
1) Press the FUNCTION key. Then press the 4 key on the number
keys.
4.LISTS AND REPORTS
PRESS SET KEY
IV-4-4