Brother INSTAFAX FAX2100M - Manual (Page 57)

IV-1. CONFIGURING THE MACHINE
A-IL-l. XJ
[xnrxncxj
OH,m
1 4 u 5 JL 6 1
W «T
1 7 II JL
or
0
JL jl J
4) Press the SET key.
FAX:
II^PUT / PRESS SET TO END
5) Enter your fax number (which can be up to 20 digits long) using
the number keys. The procedure for entering numbers is
described in detail in the section information using the
keys in this chapter.
6) Press the SET key when you have entered the fax number
correctly.
If you wish to input a "+" (INTERNATIONAL DIALING CODE
PREFIX) at the first position, press the "Chain" key and continue to
enter the number, using the correct international dialing code, and
omitting any "ZERO" at the beginning of the national area dialing
code.
TEL:
INPUT / PRESS SET TO END
7) Now enter your telephone number (which can be up to 20 digits
long) using the number keys.
8) Press the S ET key when you have entered the telephone number
correctly.
NAME;
INPUT / PRESS SET TO END
rxir~5~ii:xj
9) Enter the name you wish to appear on the faxes that you send
using the number keys. The name can be up to 20 characters
long including spaces. The procedure for entering names is
described in detail in the section Entering information using the
keys in this chapter.
10) Press the SET key when you have entered your name.
- The telephone number is only used for the Call Back Message^ or
siiper COVERPAGE.
- If you do not enter a fax number you cannot enter anything else.
- You cannot enter a "-"using the PAUSE key when registering
your fax and telephone number. Use the (<—/—>) cursor key instead
to enter a space. It will be printed as but not he displayed.
IV-1-3