Brother INSTAFAX FAX2100M - Manual (Page 33)

II-3. THE CONTROL PANEL KEYS
Key Explanation
I------ 1 CALL
Used to enable the Call Reservation feature.
M£MOHY
□□
ECM
Used to lead a document into the machine's memory. You can also use this
key to select the ECM (Error Correction Mode).
Used to confirm a function setting, or to interrupt a transmission operation.
Used to restore existing function settings, and to delete numbers or letters
during the registration of one-touch and speed dialing numbers, etc.
Pressing this key with the cursor located at the beginning of a one-touch or
speed dialing number will clear the number which has been registered. This
key is also used to obtain information and data from the confidential
mailboxes available.
Used to enable various functions in the machine.
Used to select the fax reception mode from among the following options—Auto
Answer reception mode, manual reception mode, or the FAX/TEL mode. The
LED will light to indicate the current status.
Used to set a time for a delayed transmission or delayed polling.
Used to poll (or to be polled by) a remote unit for a document. This key is
also used to transfer an in-coming call to another extension.
Used to send a fax with a password. This key is also used for chain dialing
when registering FAX/TEL numbers for one-touch or speed dialing.
ONE TOUCH KEY
Used to dial phone numbers that you have previously registered.
SHIFT
(only for InstaFAX2200M)
Used to access an extra series of fax or phone numbers for any of the one
touch keys. (For example, shift key + "00" will dial the number "30".)
HOOK
IZZI
Used to dial telephone or fax number without lifting the handset.
mo
Used to control speaker monitor volume, (high and low)
• « «
Ring volume control of handset. (High, middle, or low) This control is on the
left side of the handset base.
Zi-3-3