Brother INSTAFAX FAX2100M User Manual
Page 77
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
IV-3. RECEIVING A FAX
Registering F/T &
Remote ID
Ezzazaal |
2
|
Use the following procedure to register an F/T & Remote ID.
The initial setting is "
1) Press the
FUNCTION
key. Then press the 2 key on the number
keys.
2.REGISTRATION
PRESS SET KEY
/NTERfiUPT
I
2)
Press the
SET
key. Then press the
0
key followed by the
4
key.
04.F/T
&
REMOTE ID
PRESS SET KEY
I_______ I
3) Press the SET key.
F/T & REMOTE ID :
2^*
INPUT / PRESS SET TO END
Enter your chosen F/T & REMOTE ID number. When you have
entered it correctly/ press the SET key.
-
When you connect the external telephone to a TAD (telephone
answering device), the "F/T & REMOTE ID" you enter must be
different from the TAD operation ID.
- If you are making use of an extension or external telephone, be
sure to use the "#" and/or " symbols. This will help prevent
the fax unit from being turned on (accidentaly into reception
mode) when you are dialing.
IV-3-3