Brother INSTAFAX FAX2100M - Manual (Page 96)

V-l. RESOLUTION
Multiple resolution
transmission
1
FINE
1
S.FÌNE
I
PHOTO
)----------- 1
After transmission has been completed the unit reverts to standard
resolution mode. The three resolution LEDs are not lit.
If your fax transmission document runs to several pages^ some with
graphics, some with text and others with photographic images, you
can specify a resolution mode for each
individual page.
1) Set the document in the feeder. Use the RESOLUTION key to set
the resolution you require for the first page of your document.
2) Press the FUNCTION key followed by the 6 key.
6.CURRENT SETTINGS
PRESS SET KEY
I
INTERRUPT
I
Г^~11 Д il-XJ
[-тпг^[::д
I 7 II e irrh
I * II 0 ir^
V-1-2
3) Press the SET key, then the 2 key.
2.RESOLUTION
PRESS SET KEY
4) Press the SET key. The screen display now alternates between
the following two messages, prompting you to specify a
resolution for page 2 of your document.
PAGE 02 : STANDARD
1.STANDARD 2. FI NE
FLIP-FLOP -OR-
PAGE 02
3.PHOTO
STANDARD
4.S.FINE
5) Enter the number corresponding to the resolution you wish to
set for page 2.
PAGE 02 : FINE
PRESS SET KEY
6) Press the SET key to confirm your choice. The display now
prompts you to select a resolution for page 3. Specify your
choice in the same way. The display continues to prompt you for
resolution settings for successive pages up to a maximum of 30.
When you have selected settings for all the pages In your
transmission press the STOP key.
- The jyuper COVERPAGE and Cull Buck Messages are nut counted
when determining the page number for scanning resolution.