Brother INSTAFAX FAX2100M - Manual (Page 120)

V-9. SENDING FAXES FROM MEMORY
9. SENDING FAXES FROM MEMORY
Sending a fax from
memory
MBMORY
CZ]
FCM
To save time when transmitting a fax you can first store the
document in the memory and then transmit it from the machine^'s
memory.
1) Set the document face down in the feeder.
FAX ENTER FAX NO.
COPY PRESS COPY KEY
2) Press the MEMORY/ECM key once. You are prompted to enter
the fax number of the destination. The display also informs you
what percentage of memory is left for storing your transmission.
If you want to transmit with ECM^ press Memory/ECM Key three
times. (The ECM LED is lit and the percentage of memory
remaining is shown on the LCD.)
ENTER FAX NO. 100%
3) Enter the destination fax number using the number keys, a one
touch, a speed dial, or a Telephone Index.
Press the START key. The document is now scanned into
memory.
MEMORY 98%
4) When all documents have been stored, the unit sends the
document from memory automatically.
- You can store up to 15 pages of documents in the FAX2100M, and
up to 30 pages of documents in the FAX2200M (Brother standard
chart) into memory, but this may vary', depending on the contents
of the documents.
- When the memory is full, you can select to either send the stored
data out of the memory, or to cancel the transmission.
~ If the memory becomes full while the first page of a document is
being scanned into memory, the message "MEMORY FULL
PjRESS STOP KEY" appears on the screen. Press STOP key and
cancel the transmission.
V-9-1