Sample, Brother – Brother INSTAFAX FAX2100M User Manual
Page 141
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
V-U, LOGO REGISTRATION
10) If you are satisfied with he logo's position^ press the 1 key. If you
want to move it again, press the
2
key and repeat the process
above. If you press the 1 key, the screen changes as follows.
LOGO
REGISTERING
11) The logo is registered in the machine's memory and then
printed out.
LOGO
PRINTING
Sample
REGISTERED LOGO
brother
Enabling or disabling the logo
When you have registered a logo, the machine automatically
puts it on the COVERPAGE, Call Back Message and on all
reports and lists.
If you do not want it to appear, you can turn the function off as
follows. Press the FUNCTION key and the 5 key to display the
"User switch" menu options. Now press the SET key followed by
the 0 key and the 9 key. Press the 1 key if you want the logo to
appear, the 2 key if you do not. Press the SET key to confirm your
selection.
Some types of logo cannot he scanned into the machine. At that
time, you ahnuld try to reduce your logo by photocopying and try
this procedure again.
When there is not enough memory capacity to register a logo, the
screen displays as "MEMORY FULL", and you can not register
the logo.
In this case, you should print out "Memory used list" and erase
unnecessary registrations.
V-U-5