Input / press set to end – Brother INSTAFAX FAX2100M User Manual
Page 79
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
IV-4. USING ONE-TOUCH NUMBERS
ONE TOUCH KEY
4) Now press one of the one-touch keys, or hold down the SHIFT
key and press a one-touch key. Pressing a key on its own permits
you to register one of the numbers 00 to 29. On the
InstaFAX2200M, holding down the SHIFT key allows you to
register the numbers 30 to 59. The display changes to show the
one-touch key number.
]or
DBF
or
L_________ J
STOP
!□
★ 05
INPUT / PRESS SET TO END
means one-touch
5) Enter the number (which can have up to 20 digits). When you
have entered the fax or telephone number, press the SET key.
NAME:_
INPUT / PRESS SET TO END
6) Enter the name (up to 24 characters) in the way described in the
section entitled Entering information using the keys. Press the
SET key when you have finished.
CURRENT : FAX
l.FAX 2 TEL 3.0FF
7) Press the 1 key for Fax, the 2 key for Telephone, or the 3 key for
off.
This selection is only used for the dial list. Selecting "ofF is used
for group keys (see page IV-4-3.), or chain dialing keys (see page
IV-6-1).
CURRENT : FAX
PRESS SET KEY
8) Press the SET key to confirm the setting.
ONE-TOUCH DIAL
SELECT ONE-TOUCH KEY
9) You can either continue and register another one-touch dial
number, or end registration by pressing STOP.
IV-4-2