Brother INSTAFAX FAX2100M - Manual (Page 73)

IV-2. SENDING A FAX
• Broadcasting: This featurecanbe used to send the same document
to several different locations in a single operation. (See page V-11-
1
)
• Memory : This allows you to send document(s) from memory,
(see page V-9-1)
• ECM: This is error correction mode which checks the integrity of
a fax transmission while it is in progress and takes corrective
action, (see page V-10-1)
Redialing If the number that you have dialed is engaged you can redial it
without having to re-enter the number. There are two different
ways of doing this, depending on whether you are using manual or
automatic transmission.
Automatic redialing Automatic redialing can only be used for faxes that were sent using
automatic transmissions - not for telephone calls. You can turn
automatic redialing on or off (see page IV-1-10).
When using automatic transmission to send a fax, if the destination
number is engaged, the machine will automatically redial the
number up to three (3) times at five (5) minutes intervals.
-
Before using automatic redialing/, you can send a different fax
message or make a copy of a document using the "Interrupt"
feature.
(See page V-16-1.)
- To cancel automatic redialing, press STOP key.
IV-2-5