Kenmore Sewing Machine - Manual (Page 34)

Reverse Stitch Control
For Zigzag Stitch
In a correct zigzag stitch, the bobbin threads will not show on the top side of
f£±»ric and the top threads will show slightly on the bottom side. See below for the
correct appearance. To match this appearance, adjust the top tension.
Top tension
Too Tight
Bottom side of FiJsric
Too Tight;
— Corner of each zig
zag will pull together
on the lop side of
fabrics
Top tension
Too Loose
Bottom side of Fabric
Too Loose;
— The top thread will
loop through bottom
side of fabric and will
be
pulled almost
together.
Just Right
Bottom side of Fabric
Just Right:
Minimize the amount
of top thread visible
on the bottom side of
fabric without causing
excessive
puckering
or causing the bobbi n
thread to show on the
top side. Results vary
with fabric, thread and
sewing conditions.
Release to sew forward again.
26